5
KREEPY KRAULY
®
KRUISER™ Inground Suction Pool Cleaner Installation and User’s Guide
Connection to Pool With Two Skimmers
1. Select one skimmer for the Kruiser™ Inground
Suction Pool Cleaner.
2. Close off the other skimmer with the pump valve.
3. Connect the end of submerged hose into the
selected skimmer.
4. Refer to the “Pool with One Skimmer” instructions
on the previous page, starting from step 3.
Optional Vacuum Line Installation
Install the adjustable regulator valve in the skimmer if attaching cleaner to a
dedicated vacuum line.
Note:
Be sure that your Dedicated Suction Port is fitted with a Safety Vac-Lock
Fitting. If not, install the one that is provided with your cleaner.
1. Turn the pool pump off.
2. Close the main drain and all suction lines, except the skimmer and the vacuum
line that will connect to the cleaner.
3. Thread the vac-lock wall fitting into the end of the dedicated suction line.
Note:
Use two wraps of thread seal tape around the threads to ensure easy
removal.
4. Place the cleaner (with the hose and hose weights) into the pool and allow it to
sink to the floor.
5. Continue to feed hose vertically down into the pool until completely filled with
water and purged of air.
6. Insert the hose end of the last hose section into the vac-lock wall fitting.
Pump Valve
Safety Vac-Lock
(provided)
Safety Vac-Lock
Dedicated
Suction Port
