7
KREEPY KRAULY
®
KRUISER™ Inground Suction Pool Cleaner Installation and User’s Guide
ADJUSTMENTS
Turn on the pool pump after completing the installation and allow the pump to run
for a couple of minutes to be sure all air is out of the system.
Check the water flow and return line adjustments after installing your cleaner.
Adjusting The Flow
1. Turn the pool pump off.
2. Remove the cleaner and connect the Flow Gauge
to the end of the hose. Be sure to keep the hose
submerged to prevent any air entry.
3. Turn the pump on.
4. With the pump running, turn the Adjustment Knob
of the Regulator Valve “Faster” or “Slower” until the
disc indicator in the Flow Gauge settles between
“Maximum” and “Minimum” flow.
Note: If you have very strong pump and the flow
is still over “Maximum”, you may need to open
the main drain slightly.
5. Turn the pool pump off.
6. Remove the Flow Gauge and connect the Cleaner
to the end of the hose.
7. Be sure you keep the hose submerged to prevent
any air to enter into it.
8. Allow the cleaner to drop to the pool floor.
9. Turn the pool pump on.
Note:
Optimizing the water flow
does not mean
maximizing the flow through the
cleaner. It is recommended to use less suction to be sure the cleaner travels in a
random pattern, able to reach all areas of your pool.
Adjustment
Knob
Flow Gauge
