Pentair INTELLICHLOR IC15 Installation And User Manual Download Page 33 | Manualshive

Page: 33 / 46

background image

27

IntelliChlor Electronic Chlorine Generator Installation and User’s Guide

To install the IntelliChlor cell:

1. Using PVC glue, mount the PVC couplings to the plumbing pipe. Allow the glue to dry.

2. Mount the cell to allow access to the control panel. Install the cell onto the couplings.

Ensure the O-rings are seated properly.

3. Switch on the pump and visually inspect for leaks around the couplings.

Connecting the IC20, IC40 IC60 Cell Power Cable to the Power Center

After the cell installation is completed, connect the power cable to the Power Center:

1. Be sure that AC power is switched OFF before connecting the power cord to the Power Center.

2. Align the four (4) pins of the cell power cord connector with the socket on the bottom of the Power

Center and insert the connector. Turn the round socket nut until it locks the connector in place.

Connector socket nut.

To cell assembly

WARNING

- Switch OFF main system power to the Power Center before making any connections.

Connecting the Power Supply Cable to the IC15 Cell

After the IC15 cell installation is completed, connect the cell power cable to the Power Supply:

•

Align the four (4) pins of the cell power cord connector with the socket on the side of the Power

Supply and insert the connector. Turn the round socket nut until it locks the connector in place.

WARNING

- Switch OFF main system power to the Power Center before making any connections.

Power Supply connector

IC15 Power Supply

«
...
31
32
33
34
35
...
»

Summary of Contents for INTELLICHLOR IC15















































Reviews:

No comments

Related manuals for INTELLICHLOR IC15

Brand: MacDon Pages: 89

Brand: Yates Pages: 2

Brand: GE Pages: 242

Brand: GE Pages: 24

Brand: Balanced Body Pages: 3

Brand: IEMCA Pages: 82

KID 80-IV Touch

Brand: IEMCA Pages: 122

Brand: Calrec Pages: 92

Brand: Waterpik Pages: 2

Brand: WaterUps Pages: 2

Brand: Wang Pages: 146

Brand: Masalta Pages: 13

Brand: AGCO Pages: 44

Aesculap S4 FW103R

Brand: Braun Pages: 39

Brand: Heitronic Pages: 8

Brand: TaoTronics Pages: 2

Brand: PALAZZANI Pages: 131

VEX-WPCR Series

Brand: Exitronix Pages: 4

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands