Pentair INTELLICHLOR IC15 Installation And User Manual Download Page 25 | Manualshive

Page: 25 / 46

background image

19

IntelliChlor Electronic Chlorine Generator Installation and User’s Guide

General Recommendations

•

After new pool construction has been completed, before installing the IntelliChlor

Electronic Chlorine

Generator, install the IntelliChlor “dummy cell” (P/N 520588) to remove debris from the pipes for
thirty (30) days and to allow sufficient time for the pool plaster (or other similar material) to properly
cure and seal.

•

Read and keep this Installation and User’s Guide in a safe place.

•

Increase Sanitizer Output level as necessary after heavy rain (outdoor pools) and return to normal

afterwards.

•

Increase Sanitizer Output level when air and water temperature rise.

•

Increase Sanitizer Output level when number of pool users increase.

•

Use Cyanuric Acid ONLY as necessary to stabilize chlorine in the pool water in outdoor pools.

NOTE: DO NOT USE CYANURIC ACID IN INDOOR POOLS.

•

Once a month take a pool water sample to a pool professional for a complete analysis.

General Cautions

•

Do not get fertilizer in your pool. Fertilizers contain nitrates, which cause a high chlorine demand.

•

Never use dry acid to adjust pH in arid geographic areas with excessive evaporation and minimal

dilution of pool water with fresh water. A buildup of byproducts can damage the IECG.

•

Do not add any pool water balancing chemicals (including salt) unless the IECG is switched off.

•

Do not let the Cyanuric Acid level drop below 50 ppm in outdoor pools. NOTE: DO NOT USE

CYANURIC ACID IN INDOOR POOLS.

«
...
23
24
25
26
27
...
»

Summary of Contents for INTELLICHLOR IC15















































Reviews:

No comments

Related manuals for INTELLICHLOR IC15

Brand: ABB Pages: 14

Brand: Rabe Pages: 65

Brand: Tanco Pages: 72

Brand: HABYS Pages: 16

Brand: Acterna Pages: 72

Brand: Pall Pages: 51

Brand: ZAMST Pages: 21

Brand: Major Pages: 52

Brand: Gardena Pages: 19

Brand: Jackco Pages: 6

Brand: Tactile Medical Pages: 23

Brand: Taarup Pages: 72

Brand: U-Line Pages: 9

Green Machine H-3518

Brand: U-Line Pages: 3

Brand: Qtx Pages: 6

Brand: Hammer Strength Pages: 8

Brand: Petromax Pages: 16

Brand: SereneLife Pages: 4

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands