Pentair GREEN LEAF, Installation Instructions Manual, Page: 13 / 24

13
25
20
15
10
5
0
0:00 1:00 2:00 3:00 4:00 5:00 6:00 7:00 8:00 9:00 10:00 11:00 12:00 13:00 14:00 15:00 16:00 17:00 18:00 19:00 20:00 21:00 22:00 23:00
0:00 1:00 2:00 3:00 4:00 5:00 6:00 7:00 8:00 9:00 10:00 11:00 12:00 13:00 14:00 15:00 16:00 17:00 18:00 19:00 20:00 21:00 22:00 23:00
25
20
15
10
5
0
MON-TUE-WED-THU-FRI
SA
T-SUN
16
16
23
23 23
16 16
• Press on the “ ” button to set the clock and day of
the week
• Press on the “ ” button for 3 seconds to program
the timer programme (see page 14 for more details).
• Press on the “ ” button for 5 seconds to enter
the Installer Menu
• Press on the “ ” button to switch from Timer to
Manual ON/OFF mode
• Press on the “ ” button for 2 seconds to put the
Thermostat into OFF (standby) mode
• Press the “ ” or the “ ” to show the set
point temperature. It will blink for 5 seconds
3. Press the “ ” within the 5 seconds =>
set point = set point - 0.5°C
4. Press the “ ” within the 5 seconds =>
set point = set point + 0.5°C
Remark: The adapted temperature is valid until the
next timer Event.