Pentair GREEN LEAF, Installation Instructions Manual, Page: 12 / 24

12
Press the “ ” or the “ ” to show the set point
temperature. It will blink for 5 seconds.
1. Press the “ ” within the 5 seconds => set point =
set point - 0.5°C
2. Press the “ ” within the 5 seconds => set point =
set point + 0.5°C
To switch from Manual ON/OFF to Timer Programme,
press on the “ ” button once.
To switch off the thermostat, press on the
“ ” button for 2 seconds.
the timer programme
The Green Leaf can be programmed with 4 events per
day. Different temperatures can be maintained for
each event of the day. The days can be programmed
independently or per cluster of days.
The default Timer Programme is shown on the graph
below. You can easily adapt the programme to your
needs (see PROGRAMMING THE TIMER PROGRAMME)
25
20
15
10
5
0
0:00 1:00 2:00 3:00 4:00 5:00 6:00 7:00 8:00 9:00 10:00 11:00 12:00 13:00 14:00 15:00 16:00 17:00 18:00 19:00 20:00 21:00 22:00 23:00
0:00 1:00 2:00 3:00 4:00 5:00 6:00 7:00 8:00 9:00 10:00 11:00 12:00 13:00 14:00 15:00 16:00 17:00 18:00 19:00 20:00 21:00 22:00 23:00
25
20
15
10
5
0
MON-TUE-WED-THU-FRI
SA
T-SUN
16
16
23
23 23
16 16