manualshive.com logo in svg

Pentair Goyen Mecair FFA, Installation And Operation Manual, Page: 4 / 44

Share
Download
Pentair Goyen Mecair FFA Installation And Operation Manual Download Page 4

iv

INSTALLATION AND OPERATION MANUAL – OWNER'S RECORD  FFA  MANUAL – FILTER FAILURE ALARM

7.2  Main Screens ....................................................................................................................................................................... 22

7.2.1  Comms Check and Alarm Levels ............................................................................................................................ 23

8 OPERATION .........................................................................................................................................................................

 

24

8.1  Basic Functions ................................................................................................................................................................... 24

8.1.1  Entering the User PIN (Edit Settings) ..................................................................................................................... 24

8.1.2  User Menu – Settings Screen .................................................................................................................................. 25

8.1.3  Changing Basic Settings .......................................................................................................................................... 25

8.2  Engineering Functions ........................................................................................................................................................ 25

8.2.1  Advanced Settings .................................................................................................................................................... 25

8.2.2  Changing Advanced Settings ................................................................................................................................... 25

8.2.3  Factory Reset ............................................................................................................................................................ 25

8.2.4  Setting and Activating the User PIN ........................................................................................................................ 26

8.2.5  Trimming the 4–20mA Output ................................................................................................................................. 27

9 MAINTENANCE ...................................................................................................................................................................

 

28

9.1  Safety Information ............................................................................................................................................................... 28

9.2  Preventative Maintenance Programme ............................................................................................................................. 28

9.3  Sensor Handling in Hazardous Areas ................................................................................................................................ 29

9.3.1  Removing the Sensor from the Stack ..................................................................................................................... 29

9.3.2  Opening the Sensor Enclosure ................................................................................................................................ 29

9.4  Cleaning Procedures ........................................................................................................................................................... 29

9.4.1  Cleaning the Sensor ................................................................................................................................................. 29

9.4.2  Cleaning  the Control Unit ....................................................................................................................................... 30

10 Troubleshooting ..................................................................................................................................................................

 

31

10.1  Safety Information ............................................................................................................................................................... 31

10.2 General ................................................................................................................................................................................. 31

10.3 Alarms .................................................................................................................................................................................. 31

GENERAL NOTICES .....................................................................................................................................................................

 

33

Compliance ................................................................................................................................................................................... 33

Electrical and Electronic Equipment Waste Directive (WEEE 2012/19/EU) ..................................................................... 33

RoHS Compliance Statement ............................................................................................................................................. 33

List of Materials (ISO 14001) ............................................................................................................................................... 33

Summary of Contents for Goyen Mecair FFA













































Reviews:

No comments