8
Step 1. Attach The Seal
Slide the Aboveground Seal over the top of the swivel head and down over the main body as illustrated in
Figure 3. The seal should seat in the groove just above the footpad. Once in place, the seal should rotate
and turn freely.
Step 2. Attach The Bumper Strap
Insert the bottom end of the bumper strap (end closest to the bumper weight) into the slot provided on the
main body. Insert the top end of the bumper into the slot provided in the swivel head, see Figure 4.
Swivel Head
Seal
Main
Body
Groove
for Seal
Foot Pad
Swivel Head
Main
Body
Bumper Weight
Figure 3.
Figure 4.
Male Hose End
Female Hose End
Figure 5.
Step 3. Attach The Hose Weight And Assemble The Hose
E-Z Vac’s Hose comes in sections which must be
assembled. You will also have to attach one hose
weight to the end of the third hose section, see
Figure 6 on page 9.
