Pentair 160301, Installation And User Manual

Page: 4 / 16

CLEAN AND CLEAR
®
PLUS Cartridge Filter Installation and User’s Guide
IMPORTANT WARNING AND SAFETY INSTRUCTIONS
THIS FILTER OPERATES UNDER HIGH PRESSURE
When any part of the circulating system, (e.g., closure, pump, filter, valve(s), etc.), is serviced, air can enter
the system and become pressurized. Pressurized air can cause the top closure to separate which can
result in severe injury, death, or property damage. To avoid this potential hazard, follow these instructions:
1. If you are not familiar with your pool filtering system and/or heater:
a. Do NOT attempt to adjust or service without consulting your dealer, or a qualified pool
technician.
b. Read the entire Installation & User’s Guide before attempting to use, service or adjust the
pool filtering system or heater.
2. Before repositioning valve(s) and before beginning the assembly, disassembly, or any other service
of the circulating system: (A) Turn the pump OFF and shut OFF any automatic controls to ensure
the system is NOT inadvertently started during the servicing; (B) open the manual air bleeder valve;
(C) stand clear of the filter; (D) wait until all pressure is relieved; pressure gauge must read zero psi.
3. Whenever installing the filter closure FOLLOW THE FILTER CLOSURE WARNINGS
EXACTLY .
4. Once service on the circulating system is complete FOLLOW INITIAL START-UP
INSTRUCTIONS EXACTLY .
5. Maintain circulation system properly. Replace worn or damaged parts immediately, (e.g.,
closure, pressure gauge, valve(s), o-rings, etc).
6. Be sure that the filter is properly mounted and positioned according to instructions provided.
This filter must be installed by a qualified pool serviceman in accordance with all applicable local codes
and ordinances. Improper installation could result in death or serious injury to pool users, installers, or
others and may also cause damage to property.
Always disconnect power to the pool circulating system at the circuit breaker before servicing the filter.
Ensure that the disconnected circuit is locked out or properly tagged so that it cannot be switched on
while you are working on the filter. Failure to do so could result in serious injury or death to serviceman,
pool users or others due to electric shock.
Do not operate the filter until you have read and understand clearly all the operating instructions
and warning messages for all equipment that is a part of the pool circulating system. The following
instructions are intended as a guide for initially operating the filter in a general pool installation. Failure
to follow all operating instructions and warning messages can result in property damage or severe
personal injury or death.
To reduce the risk of injury, do not permit children to use this product.
Never exceed the maximum operating pressure of the system components. Exceeding these limits
could result in a component failing under pressure. This instantaneous release of energy can cause the
filter to separate and could cause severe personal injury or death if they were to strike a person.
iii