42
IntelliFlo VF Installation and User’s Guide
Features Menu (Continued)
4. To change a setting, press the
Left
and
Right
arrows to select which digit to modify, then use the
Up
and
Down
arrows to change the selected digit.
5. When you are done, press the
Enter
button to shave the changes. To cancel any changes, press the
Escape button to exit mode without saving.
M.O. Flo Operation
Like Feature 3-9, M.O. Flo functions as part of the fi lter cycles programmed in the Filter menu, and
IntelliFlo must be in Filter Mode for M.O. Flo feature to operate. M.O. Flo cannot be operated on an “on
demand” basis. If
Enabled
is selected in the M.O. Flo “Activation” setting , M.O. Flo will start and stop
at the times programmed in the Setup Menu whenever IntelliFlo is in Filter Mode. If
Disabled
is selected
in the “Activation” setting, IntelliFlo will not run the M.O. Flo feature.
Wave and Pulse Setup
To access the Wave or Pulse menus:
1. Ensure that the green power LED is on and the pump is stopped.
2. Press the
Menu
button. “Pool Data” is displayed.
3. Use the
Up
and
Down
arrow buttons to scroll to the “Features” menu item. Press the
Select
button to select it. “Feature 1” is displayed. Use the
Up
and
Down
arrow buttons to scroll to the
“Wave” or “Pulse” menu item. Press the
Select
button to select it.
a)
To choose whether the Wave or Pulse feature will be Disabled or Enabled:
Press the
Select
button to access the “Activation” setting (Default Disabled). To change the setting,
use the up
Up
and
Down
arrow buttons to toggle between the Disabled and Enabled
options. Press the
Select
button to select one. Go to step 5, below.
b)
To specify the feature to which to link the Wave or Pulse feature:
U
se the
Up
and
Down
arrow buttons to scroll to the “Feature Linked” setting. Press the
Select
button to
access it (Wave default 1, Pulse default 2). To change the setting, see step 4, below.
c
)
T
o set the maximum pump speed for the Wave or Pulse feature:
U
se the
Up
and
Down
arrow buttons to scroll to the“Set Max Speed” setting. Press the
Select
button to
access it (Default 3450 RPM). To change the setting, see step 4, below.
d)
T
o set the minimum pump speed for the Wave or Pulse feature:
U
se the
Up
and
Down
arrow buttons to scroll to the “Set Min Speed” setting. Press the
Select
button to
access it (Default 3400 RPM). To change the setting, see step 4, below.
e
)
To set the period length for the Wave or Pulse feature:
U
se the
Up
and
Down
arrow
buttons to scroll to the “Period” setting. Press the
Select
button to access it (Default 10
seconds, or 0010). To change the setting, see step 4, below
Summary of Contents for IntelliFlo VF
Page 67: ...65 IntelliFlo VF Installation and User s Guide Notes ...
Page 68: ...P N 357220 Rev A ...
Page 103: ...P N 357220 Rev A ...
