background image

EasyTouch

®

/IntelliTouch

®

 SCG Power Supply Replacement Parts Installation Guide

i

SERIOUS BODILY INJURY OR DEATH CAN RESULT IF THIS
PRODUCT (UNIT) IS NOT INSTALLED AND USED
CORRECTLY.

INSTALLERS, POOL OPERATORS AND POOL OWNERS
MUST READ THESE WARNINGS AND ALL INSTRUCTIONS
BEFORE USING THIS PRODUCT. This Guide provides installa-

tion and operation instructions for the product. Consult

Pentair Water Pool and Spa, Inc. with any questions regarding

this product.

This product is intended for use in swimming pool applications
only.

Most states and local codes regulate the construction, installa-
tion, and operation of public pools and spas, and the construc-
tion of residential pools and spas.  It is important to comply with
these codes, many of which directly regulate the installation and
use of this product. Consult your local building and health codes
for more information.

IMPORTANT NOTICE - Attention Installer: 

This Installation

Guide (“Guide”) contains important information about the
installation, operation and safe use of this product. This Guide
should be given to the owner and/or operator of this equipment.

Attention User: 

This Guide contains important information that

will help you in operating and maintaining this product. Please
retain it for future reference.

Head

Body

U

pp

er

A

rm

Uppe

r

Arm

Leg Joint

Leg

 J

oint

Leg Joint

Le

g J

oin

t

Head

Body

U

pp

er

A

rm

Leg Joi

nt

Leg

 J

oint

Leg Joint

Le

g J

oin

t

This product is designed and manufactured for safe and reliable
service when installed, operated and maintained according to the

information and installation codes referred to in this Guide. This is a safety alert
symbol. When you see this symbol in this manual or on the product, look for one
of the following signal words; 

DANGER

WARNING

,

 CAUTION

 and 

NOTICE

and comply with the information. Be alert to the potential hazard. Ensure 

to read

and comply with all of the warnings and cautions in this manual.

IMPORTANT WARNING AND SAFETY INSTRUCTIONS

EasyTouch and IntelliTouch replaceable parts must be installed
by a licensed or certified electrician or a qualified pool
professional in accordance with the National Electrical Code
(NEC), NFPA 70 or the Canadian Electrical Code (CEC), CSA
C22.1. All applicable local installation codes and ordinances
must also be adhered to. Improper installation will create an
electrical hazard which could result in death or serious injury to
pool users, installers or others due to electrical shock, and may
also cause damage to property.

Before installing this product, read and follow all safety warning notices and
instructions which are included. Failure to follow safety warnings and instructions
can result in severe injury, death, or property damage. Call (800) 831-7133 for
additional free copies of these instructions.

Risk of Electrical Shock or Electrocution!

Summary of Contents for IntelliChlor SCG













Reviews: