PENTAGRAM QuadPen [P2020]
Tablet installation
Follow the steps below to install the tablet properly. The tablet drivers are designed for
Windows XP / Vista / 7 systems.
1.
Insert the supplied CD with drivers into the CD-ROM drive in the computer.
2.
If the installer does not launch automatically, click the Start > Run menu, enter
X:\setup (where X is the CD-ROM drive letter) and press Enter.
3.
In the installer window, click the Q Pad Driver, to start the drivers and Pen Pad
application installer.
4.
Follow the instructions displayed on the screen to install the drivers and the Pen Pad
application.
5.
When the installation finishes, a prompt will display, asking the user to restart the
computer. Close all open applications and click the OK button.
6.
When the computer has restarted, connect the USB cable to the tablet, and an
available USB port on your computer and wait until the system finish the installation of the
tablet.
7.
Check whether all tablet functions work properly. A pen movement over the tablet
surface should cause the cursor movement on the screen.
7
EN
