horNET P6121-L2 / P6122-09 / P6123-09
5
Introduction
The Wireless Network Adapter is a powerful 32-bit Cardbus/PCI/USB Adapter that installs
quickly and easily into PCs. The Adapter can be used in Ad-Hoc mode to connect directly with
other cards for peer-to-peer file sharing or in Infrastructure mode to connect with a wireless
access point or router for access to the Internet in your office or home network.
The Wireless Cardbus/PCI/USB Adapter connects you with 802.11g networks at up to an
incredible 54Mbps! And for added versatility, it can also interoperate with all the up to 11Mbps
802.11b products found in homes, businesses, and public wireless hotspots around the
country. And in either mode, your wireless communications are protected by industrial-
strength WPA, so your data stays secure.
This User Manual contains information on how to install and configure your Wireless Adapter
to get your network started accessing the Internet. It will guide you through the correct
configuration steps to get your device up and running.
Package Contents
1.
Wireless network Cardbus/PCI/USB adapter
2.
Manual, Drivers and Utility on CD
3.
Quick Installation Guide
If any of the above items are missing, please contact your reseller.
Before you begin
You must have at least the following:
•
A laptop computer/desktop PC with an available 32-bit Cardbus/PCI slot
•
At least a 300MHz processor and 32MB of memory
•
Windows 98SE, ME, 2000, XP
•
A CD-ROM Drive
•
Cardbus/PCI/USB controller properly installed and working in the laptop computer
•
A 802.11g or 802.11b Access Point (for infrastructure Mode) or another 802.11g or
802.11b wireless adapter (for Ad-Hoc; Peer-to-Peer networking mode.)
Summary of Contents for P6121-L2
Page 4: ......
