Cerberus P 6331-42
7
•
High Speed Internet Access: downstream rates of up to 24Mbps and upstream rates of
up to 1Mbps. Cerberus ADSL2+ Lite is compliant with the following standards: ANSI
T1.413 issue 2, ITU-T G.992.1 (G.dmt), ITU-T G.992.2 (G.lite), G.994.1 (G.hs,
Multimode), ITU-T G.992.3 (ADSL2 G.dmt.bis), ITU-T G.992.5 (ADSL2+; Annex A, I, J, L
& M).
•
Multi-Protocol to Establish a Connection: The router supports PPPoA (RFC 2364 - PPP
over ATM Adaptation Layer 5), RFC 1483/2684 encapsulation over ATM (bridged or
routed), PPP over Ethernet (RFC 2516) and IPoA (RFC1577) to establish a connection
with an ISP. The router also supports VC-based and LLC-based multiplexing.
Product Overview
Important Notes
•
Do not use the router in high humidity or high temperatures.
•
Do not use the same power source for the router as other equipment.
•
Do not repair or open the case by yourself. If the router is too hot, turn off
the power immediately and have it repaired at a qualified service center.
•
Avoid using this product and all accessories outdoors.
•
Place the router on a stable surface.
•
Only use the power adapter that comes with the package. Using a
different voltage rating power adaptor may damage the router.
Front Panel
LED
Action
Description
PWR
Off
No power is supplied to the device
Steady light
Connected to an AC power supply
SYS
Steady light
System is ready
WLAN
Off
Access point is disabled
Steady light
Access point is enabled
Blinking light
Transmitting/Receiving data
LAN (1-4)
Off
No Ethernet connection
Steady light
Connected to an Ethernet port
Blinking light
Transmitting/Receiving data
ADSL
Off
No ADSL signal
Steady light
ADSL signal is established
Blinking Light
Establishing ADSL signal
PPP
Steady light
PPPoA / PPPoE connection established
Summary of Contents for Cerberus P 6331-42
Page 4: ...Cerberus P 6331 42 4 ...
Page 58: ...Cerberus P 6331 42 58 ...
Page 59: ...Cerberus P 6331 42 59 ...
Page 60: ...Cerberus P 6331 42 60 ...
