manualshive.com logo in svg

PennEngineering ATLAS RIV949, Opearting Instructions

Share
Download
PennEngineering ATLAS RIV949 Opearting Instructions Download Page 28

28      PennEngineering • www.pemnet.com

Instruction Manual - RIV949

5 - INSTALLATION

5.1 -  TRANSPORT AND HANDLING

The tool can be hand carried. It is recommended that you store the tool in its case after use.

 

 A 5 

  

Damages to the tool caused during transport and/or handling are not covered by WARRANTY. 

 

Repairs or replacements of damaged parts are at the Customer’s expense.

5.2 -  STORAGE

 If you are not going to use the tool for a long time, put it away according to these recommendations:

 

• Store the tool indoors.

 

• Protect the tool from impacts and stresses by keeping it in its case.

 

• Protect the tool from damp and excessive thermal excursions.

 

• Keep the tool away from corrosive substances.

5.3 -  CONNECTIONS

To avoid problems when starting the tool, we recommended you 

observe the following:

 

5.3.1 -  PNEUMATIC  

 The pneumatic line is connected by mean of a quick-

release coupling hose to be attached to the supple 

air connection, thread 1/4”+1/4” gas, supplied with 

the tool. 

The air supply hose must be flexible and must 

meet the safety requirements of the pressurized 

products. 

5.4 -  AIR SUPPLY

To prevent the early wear of the tool’s moving components, the air supply line must be free from dirt and dampness.

We recommend using dry air: i.e. not greased.

1/4”gas air connector or 

quick coupler for hose d. 10

Summary of Contents for ATLAS RIV949









































Reviews:

No comments

Brands by name

Popular brands

Load more brands