These exhaust fans are easily fitted into any wooden enclosures all that is required is a an awl, cross head
screwdriver and a 79mm (3⅛") Hole CuDer.
They can also be fitted into plastic cases and racks, using a different outside grille kit.
Once mounted just hook-up to the 12V DC PSU via the input socket.
A second unit can also be run from the 500mA power supply by using a
CRC-LINK
cable.
Thermal Control
A thermal sensor accessory, the
CRC-TEMP
can be Plugged into the TEMP socket. It is set to operate at 40º
and will reset at 30º, + or - 2º.
Using the acrylic adhesive pad, it should be attached to an area where the sensor can pick up the ambient
temperature of the equipment being cooled, and
NOT
directly to the main heat source.
REGULAR MONTHLY CLEANING OF THE FAN BLADES TO REDUCE ANY DEPOSIT BUILD UP IS ADVISED
USE A SMALL PAINT BRUSH
DO NOT
USE AN AIR BLOWER WITHOUT STOPPING THE BLADES
9-10 Parsons Road, Parsons Industrial Estate, Washington Tyne & Wear, NE37 1HB, UK
0191 416 1717 or www.penn-elcom.com
2016 –FT80-Q Cupboard Exhaust Unit is the exclusive design copyright of Penn-Elcom UK NE37 1HB - E&OE
CRC-TEMP
500mA -PSU