Programming Using Onboard Buttons
1.
To enter the Main Menu, press the
Menu/Enter
button. (Time of Day will flash)
2.
To set the
Time of Day
, press the
Set/Change
button. (First digit will flash)
• To change digit value, press the Set/Change button.
• To accept the digit value, press the Menu/Enter button.
• Next digit will flash to begin setting.
• Once the last digit display is accepted, all digits will flash.
3.
To set
A.M. or P.M.
, press the
Menu/Enter
button.
• To change digit value, press the Set/Change button.
• To accept the digit value, press the Menu/Enter button.
• Once A.M. or P.M. is accepted, the next menu item will flash.
4.
To set
Hardness
, an “H” will appear to enter Compensated Hardness in grains per
gallon (gpg). Default setting is 25 gpg.
NOTE:
If the water contains iron and / or manganese, multiply the total parts per mil-
lion (ppm) by "four" (4) and then add to the grains per gallon (gpg) of hardness. Use
this COMPENSATED HARDNESS level when programming the regeneration fre-
quency.
5.
To Exit Main Menu, press the
Menu/Enter
button.
NOTE:
If no buttons are pressed for 60 seconds, the Main Menu will be exited auto-
matically.
25
Summary of Contents for PWXH-150
