2.
Install the faucet as shown in Fig 1. Assistance may be needed to hold the faucet in
place while the nut is tightened.
3.
Once the faucet is secure, install the 7/16" UNS x 3/8" QC faucet connector on the
threaded nipple. This fitting does not require sealant as it seals at the beveled sur-
face. Tighten the fitting hand tight then use an adjustable wrench to tighten an addi-
tional 1/2 turn.
4.
Now push the blue tube into the faucet connector. Leave the other end of the blue
tube unconnected for now. It will be connected later in the installation.
11