background image

 

Troubleshooting Guide 

NOTE: 

There is a problem in VGA mode (Only VGA mode applied).

 

PROBLEM

 

POSSIBLE

 

SOLUTION

 

The signal is out of range.

 

- Adjust resolution, horizontal frequency, or vertical 

frequency. 

- Check it whether the signal cable is connected or 

loose. 

- Check the input source. 

Vertical bar or stripe on 
back ground & Horizontal 

 

Noise & Incorrect position.

 

- Work the auto configure or adjust clock, phase, or 

H/V position. 

Screen color is unstable or 
single color.

 

-    Check the signal cable. 
-    Reinstall the PC video card. 

 

Maintenance                                                                                                                                     

Early malfunctions can be prevented. Careful and regular cleaning can extend the 
amount of time you will have your new

 

TV. Be sure to turn the power off and unplug the 

power cord before you begin any cleaning.

 

Cleaning

 

the

 

screen

 

1. Here’s a great way to keep the dust off your screen for a while. Wet a soft cloth in a 
mixture of lukewarm water and

 

a little fabric softener or dish washing detergent. Wring 

the cloth until it’s almost dry, and then used it to wipe the screen.

 

2. Make sure the excess water is off the screen, and then let it air-dry before you turn 
on your TV.

 

Cleaning

 

the

 

cabinet

 

To remove dirt or dust, wipe the cabinet with a soft, dry, lint-free cloth. Please be sure 
not to use a wet cloth.

 

Extended

 

Absence

 

If you expect to leave your TV dormant for a long time (such as a vacation), it’s a 
good idea to unplug the

 

power cord to protect against possible damage from 

lightning or power surges.

 

Disposal of old electrical appliances 

The European directive 

2012/19/EU

 on Waste Electrical and Electronic 

Equipment (WEEE), requires that old household electrical appliances must 
not be disposed of in the normal unsorted municipal waste stream. Old 
appliances must be collected separately in order to optimize the recovery 
and recycling of the materials they contain, and reduce the impact on human 
health and the environment. 
The crossed out “wheeled bin” symbol on the product reminds you of your 
obligation, that when you dispose of the appliance, it must be separately 
collected. 
Consumers should contact their local authority or retailer for information 
concerning the correct disposal of their old appliance. 

 

 
 
 
 
 

 

 

 

 
 

been designed in such a way th

electrical earth. 

at it does not  require a safety connection

 to 

 

This equipment is a Class        or double  insulated electrical appliance. It has 

24

Summary of Contents for PNDLFHTU40




























Reviews: