Pendix Eco ePower300, System Instructions

Page: 11 / 16

11
EN
• Pedaling frequency: The motor produces its optimum
level of effect at pedaling rates (frequencies) between 60
and 70 per minute. In this range, less energy is used than
at other frequencies, which allows for a longer distance.
7. In the case of an error
Eco ePower300
Conditions
Charging level ideal favourable difficult
100 % 105 km 78 km 55 km
70 % 74 km 55 km 39 km
40 % 42 km 31 km 22 km
10 % 11 km 8 km 6 km
Smart ePower300
Conditions
Charging level ideal favourable difficult
100 % 72 km 51 km 35 km
70 % 50 km 36 km 25 km
40 % 29 km 20 km 14 km
10 % 7 km 5 km 4 km
Sport ePower300
Conditions
Charging level ideal favourable difficult
100 % 45 km 31 km 19 km
70 % 32 km 22 km 13 km
40 % 18 km 12 km 8 km
10 % 5 km 3 km 2 km
Eco ePower500
Conditions
Charging level ideal favourable difficult
100 % 160 km 118 km 83 km
70 % 112 km 83 km 58 km
40 % 64 km 47 km 33 km
10 % 16 km 12 km 8 km
Smart ePower500
Conditions
Charging level ideal favourable difficult
100 % 110 km 78 km 53 km
70 % 77 km 54 km 37 km
40 % 44 km 31 km 21 km
10 % 11 km 8 km 5 km
Sport ePower500
Conditions
Charging level ideal favourable difficult
100 % 69 km 47 km 29 km
70 % 48 km 33 km 20 km
40 % 27 km 19 km 12 km
10 % 7 km 5 km 3 km
Should your motor not function any more, this can have dif-
ferent reasons. The following signals have been installed to
indicate the system in which the defect has occurred:
• A blue light blinking at intervals of 0.5 seconds à battery
defect
• A blue light blinking at intervals of 2 seconds à motor de-
fect (battery must be connected with motor)
• The LED display will indicate a defect as long as it is pre-
sent in the system. In such cases, you can switch the LED
display off by pushing the ON/OFF button down for 40
seconds
The following table shows measures you can take by your-
self or have a specialist/bicycle mechanic check through/
perform for you.
If, after taking these measures, your motor is still not activa-
ted, please contact ,in case of battery or drive system faults,
your authorized bicycle specialist or Pendix representative
where the defect can be investigated in greater detail. If an
exchange is necessary, the whole process will only take pla-
ce between Pendix and your bicycle retailer.
Repairs on the motor may only be carried out by
a bicycle specialist/technician and when original
replacement (spare) parts are used.
Caution: improperly carried out repairs can cause
accidents and severe damage.