Similarly fold up and fit the two Outer
Bolster Frames.
Fold up and fit the Central Stiffeners /
Spring seats. The spring seats fit
between the inner edges of the traction
ears, engaging in similar slots to the Bolster
Frames on the outside. You will find, if you
start by sliding the 'noses' of the spring
seats between the opposing edges of the
traction ears, that the stiffeners can be
sprung into place between the traction
ears. Again holding the 180° folds of each
traction ear firmly together, run a good
fillet of solder under the traction ear where
it engages with the Central Stiffener.
Pair up the bolster with its subframe, as designated by the presence or absence of
the tiny etched triangular marks. Note that the outer end of the bolster, as
distinguished by the horizontal parts of the outer bolster frame being lower than those
of the inner bolster frame, should be oriented towards the coupling end of the
subframe.
Class 47 Bogie Bolster
22/52
(c) PenBits Model Railways, All Rights Reserved
04/05/2017