To set the Station ID hold the magnetic wand to an internal magnetic switch labeled as
SW-1
situated on upper left corner of the unit. The LCD will display two options (one at time) to
select from.
To select “
Set Station#”
hold the magnet to SW-1 when this option is displayed.
To change the Station ID hold the magnet to SW-1 and the ID starts changing. The
numerical valued is incremented by 1. The maximum value of the Station ID is 16. The
value rolls over to 1 once maximum value is exceeded.
Once the desired station ID is achieved, move the magnet away. After 5 seconds of no
switch activity the unit will return to its normal operation.
The new stations ID is retained in non-volatile memory is recalled when the unit is
powered up again.
Set
Station#
Set
Zone ID
LCD swaps these 2 messages
For the user to select
8
Operators Manual Dual Channel Wireless Gateway Rev 1. Feb 2014
