PELTOR ADAPTER FL5000
CONGRATULATIONS ON AN EXCELLENT CHOICE!
Peltor FL5000 adapters are tested and approved according to EMC directive
89/336/EEC, which means that they meet the requirements for CE labelling.
The EX adapters are also tested according to 94/9/EC by NEMKO, which has
issued an EC-Type Examination Certificate number Nemko 03ATEX214.
Sealed to IP65 (dust-free and protected against water jets) according to
SS-EN 60 529.
Read these instructions carefully to get the most out of your Peltor product.
CHARACTERISTICS
Peltor’s FL5000 adapter series offers the optimum adaptation of Peltor headsets
to most communication radios on the market.
Design
The adapter is enclosed in a functional, watertight, sturdy casing with no
protruding parts. The unit fits easily in your hand, but is also easy to wear
attached to your clothing, without being in the way or snagging on anything.
On the back of the adapter is a sturdy clamp (A), which can be twisted 360°,
making the adapter as convenient and flexible as possible in all situations.
The clamp is removable if you do not need to secure the adapter. The adapter
also has an attachment loop (B), which can be used to secure it when not
using the clamp.
PTT button (C)
The watertight PTT button (Push To Talk) is made of a special, soft plastic. It
is located on the front of the unit and is designed for easy access with the right
or left hand, even with heavy gloves. The PTT button has a pressure point that
indicates the on and off positions.
Connector cord
The outgoing cord (D) has a contact for a communication radio or mobile
telephone. The cord has a flexible, rugged reinforcement where it attaches
to the adapter.