9
BACK PANELS TO CABINET INSTALLATION
1. Identify end panel and back panels. Each back panel width should correspond to the width of its lower cabinet
section.
3. Continue installing back panels “B,” “C,” and “D” the same as panel “A,” locking the cams as you go.
Frontside
of
panels
Tighten
Cams
4. Screw the bottom of the panels into wall studs 2” from the bottom.
2.
Place the end panel on the base using the locating pins. Attach back panel “A” to the end panel using
the locating pins. Back panel will rest on the back of the lower cabinet. Tighten the cams 1/3 clockwise
using a #3 Phillips screwdriver.
1.013.2466 R00
