background image

#111325-001 - 

Product Manual: Model #1453 CENTRIFUGAL BLOWER

 - Revision 04 - Date: 06-05-2015

Page 7

2.0 - Introduction & Product Information

Congratulations on your choice of a 

Pelsue Model #1453 Centrifugal Blower 

to compliment your confined space 

ventilation operation. This equipment has been designed and manufactured to exceed confined space requirements 

and regulations in order to meet the needs of the discriminating operator for efficiency and safety during confined space 

entry operations.

Safe, efficient and trouble-free operation and maintenance of the system requires that anyone who will be operating, 

maintaining, or inspecting the equipment, read, understand and follow all the operation, safety, maintenance, and inspec-

tion instructions contained within this manual. This manual covers the Pelsue Model #1453 Centrifugal Blower.  Use the 

Table of Contents as a guide to find specific information.

keep this manual available for future reference if required, and as a tool in the training of new operators. 

This product is a part of a system for confined space 

ventilation operations. The user must read, understand 

and follow the instructions contained in this manual 

before using this equipment.  Failure to follow these 

instructions could result in serious injury or death.

2.1 - Serial Number

Product Serial Number

Always give your dealer the serial number of your Pelsue confined space venti

-

lator product when ordering parts or requesting service or other information.

The specification & rating decal is permanently embossed with a serial number. 

The rating decal is located at the top of the housing of the centrifugal blower 

as shown in 

Fig. 2a

. The specification & rating decal will appear as shown to 

the right in 

Fig. 2b.  A space has been provided below for the recording of the 

serial number for future reference. 

Figure 2b:

 #1453

Serial Number Decal

                        

MODEL:__________________________________________

Serial Number :_____________________________________

#1453

SERIAL

NUMBER

LOCATION

Figure 2a:

 Serial Number 

Location

Summary of Contents for 1453

















Reviews: