background image

#111325-001 - 

Product Manual: Model #1453 CENTRIFUGAL BLOWER

 - Revision 04 - Date: 06-05-2015

Page 11

4.2 - General Safety Information

!

! CAUTION !

 - 

Be sure the blower has been shut down and the spark plug wire has been dis-

connected before doing any maintenance or repair work on the blower. 

 

! CAUTION !

 - 

Check all fluid levels prior to operating the blower. Refer to engine manual for 

fluid types and required amounts. 

!  CAUTION  !

 - 

The engine of this unit has been modified with a stop on the throttle lever. 

Removal  of  this  stop  may  lead  to  an  “overspeed”  condition  of  the  blower,  which  may  cause 

damage to the blower wheel and/or housing and could result in injury.

Safety Precautions:

 It is necessary to follow these safety precautions, each time, prior to using the product.

The Safety Precautions are not limited to, but must include the following items;

1.

  Do not use the blower for anything other than its intended use.

 

2.

  Do not wear loose clothing that can become entangled in operating machinery. Do not operate the blower without  

      inlet or outlet grilles in place. 

3.

   Do not place fingers or any other object through inlet or outlet grilles.

4.

  To prevent exhaust fumes from being pulled into the blower intake, never run the engine in an enclosed area and  

      always position the blower intake into the wind.

5.

  Always be sure to shut down the engine and extinguish all smoking materials before filling the fuel tank.

6.

  Always be sure to fill the fuel tank outdoors or in a well ventilated area. Never start the engine if the fuel has been  

      spilled until the spill has evaporated and there is no longer smell of gas fumes.

7.

  Never store or use gasoline within 50 feet of anything which may produce a spark or flame. 

8.

   Ensure that toxic fumes are not blown into a confined space. 

9.

   Never use this blower in any explosive environment.

10.

   Do not leave blower operating while unattended.

Summary of Contents for 1453

















Reviews: