P/N UM2101KL_2101KG_REV20181128
9
ASSEMBLY INSTRUCTIONS (CONT.)
9.
Obtain the plastic bracket cover. Clip the
load cell cable into the divot in the middle
of the cover and align the cover over the
silver display support.
Obtain the two
remaining M4 0.7 x 10mm screws (Part
E). Using a Phillips screwdriver, attach
the bracket cover over the silver display
bracket.
10. Plug the load cell cable into the load cell
port on the rear of the display head.
11. Attach the plastic display support covers
(Part G) on the back and front of the
scale as shown.
12. Obtain the handle and align it with the
ends of the side handrails. Insert the two
medium M6 1.0 x 10mm bolts (Part C)
into the holes on the underside of the
handle. Using the included 4mm Allen
wrench, attach the handle to the center
handrail. The handle should be attached
with the Warning label facing up. Scale
assembly is complete. See Powering the
Scale on page 10 for battery/AC adapter
instructions. If powering the scale via AC
adapter, see the next step for attaching
the adapter holder.
13.
Optional Step
– For powering the
scale via AC power adapter.
Attach the
adapter holder to the handrail using the
two included sheet metal screws (Part
D). Use a Phillips head screwdriver to
tighten the screws.
