Pelsis CURTIS DYNA-FOG HURRICANE ES HESEU User Manual Download Page 5

strongly recommended that all such sources be eliminated in the appropriate manner. To avoid danger of fire or explosion in 

an enclosed space, the enclosed volume fogging time and required formulation volume should be carefully calculated. While 

operating the machine, always carry the machine by the carrying handle to ensure that you are properly grounded.

5.  Proper and Improper Use

.

The following rules apply to the operation of this machine:

DO read the entire manual before operating the machine and pay particular attention to all

CAUTIONS AND WARNINGS

 •

  Only use water-base formulations with this machine

 •

  Store formulation in its original labelled container.

 •

  Only use a 3-prong grounded extension lead which is properly rated for voltage, current, and length and which is 

free from nicks, cracks, and other signs of prior abuse. For lengths up to 30.5 metres. Leads with No. 12 AWG wire are 

adequate.

 •

  Turn off the appliance before unplugging. Unplug by grasping the plug. Do not pull on the lead to unplug. Do not unplug 

machine with wet hands.

 •

  Replace damaged or worn electric lead immediately.

 •

  Turn the flow valve CLOCKWISE to the OFF position after each fogging application while the motor is still operating to 

allow clearing of the lines. 

 •

  Always comply with any requirements for protective clothing, goggles, facial masks, or respiratory equipment required 

by the formulation label.

 

  Ensure that formulation is applied only in strict compliance with the formulation label. 

DO NOT

 •

 Do not use oil-based or flammable formulations with this machine.

 •

 Do not use a machine that is broken or damaged in any way.

 •

 Do not alter the machine by adding or removing parts.

 •

 Do not restrict the motor blower air intake area.

 •

 Do not tamper with the output nozzle or 3-prong electrode and charging ring (collector).

 •

 Do not allow the machine to operate unattended.

 •

 Do not stand in water or hold over water while operating machine.

 •

 Do not allow the power lead or extension lead to be submersed in water.

 •

 Do not use outdoors when it’s raining.

 •

  Do not apply more than 2.7 litres per 1,000 cubic metres in an enclosed space. Exceeding this concentration is both 

hazardous and wasteful.

 •

 Do not touch the 3-prong electrode while the machine is operating.

 

Summary of Contents for CURTIS DYNA-FOG HURRICANE ES HESEU











Reviews: