16
17
|
SETTING UP YOUR BIKE
SETTING UP YOUR BIKE
LOCATION REQUIREMENTS
MOVING THE BIKE
y
Place the bike on a solid, level surface
y
Use a mat to avoid damage to the bike and floor.
y
Allow a clearance of 24” / 60 cm on each side of the bike.
y
Do not use extension cords or adaptors. The included power cord must
be able to reach an outlet.
y
Tilt the bike forward onto the wheels. Lift the rear stabiliser while a second person
holds the handlebars.
y
Carefully roll the bike to the new location. Avoid uneven surfaces.
y
If the bike rocks or wobbles after being set down, adjust each foot until all four feet rest
firmly on the floor. Tighten a foot to shorten, or unscrew to lengthen.
24" / 60
c m
24" / 60
c m
24" / 60
c m
24" / 60
c m
