38
39
|
MAINTENANCE AND CARE
MAINTENANCE AND CARE
AFTER EACH RIDE
EVERY 3 TO 5 RIDES
y
Cleaning
: Wipe down the bike using a damp cloth.
y
Leveling feet
: If the bike rocks or wobbles, adjust each foot until all four feet rest firmly
on the floor. Tighten a foot to shorten, or unscrew to lengthen.
y
Cleaning
: Clean the bike thoroughly using a damp cloth and a mild household cleaner
diluted in water. Do not use cleaning products containing ammonia. Clean the
touchscreen using an electronics wipe.
y
Pedals
: Tighten any loose pedal with the included 15 mm spanner. Pedals should
be tightened to 34 N·m/25 lb-ft of torque. Turn clockwise to tighten the right pedal and
anti-clockwise to tighten the left pedal.
y
Cleats
: Use a 4 mm Allen key to tighten any loose screws attaching your cleats to
your cycling shoes.
y
Seat
: Make sure the seat is parallel to the ground. Then use the included 13 mm
spanner to tighten the seat-fixing nuts on both sides.
CAUTION:
To ensure safe operation and optimal performance, check for wear
and damage and perform maintenance on a regular basis. Replace any damaged or
defective parts immediately. Do not use the bike until the repair is performed. Only use
original parts from the manufacturer. Changes or modifications to this unit not expressly
approved by Peloton could void the warranty.
CAUTION:
Always unplug the bike immediately after use and before cleaning or
performing maintenance. Service other than the procedures described here must be
performed by an authorised technician.
