Screen-off function
When the machine is in the working state, the screen will go out automatically if there is no
operation for 1 minute, and only the operation mode logo will be kept on. Press and hold the " "
and "-" buttons for 2 seconds at the same time to turn off the screen extinguishing function, then
press and hold the " " and "-" buttons for 2 seconds at the same time again to turn on the screen
extinguishing function.
Short-circuit Temperature Control Sensor, Open Circuit Protection
In any mode, if the temperature limiter has short circuit and open circuit protection, and the digital
screen displays "E1" or "E2" and keeps flashing, pressing any button will not work. The buzzer
sounds 10 times.
Safety protection
Tip-over protection
When it is in the ON state and indoor ambient temperature Th is higher than 122°F, the system will turn
off all the outputs, the digital screen will display "FF" and flash at a frequency of 1 time/second; then,
pressing any button will not work, and the protection can only be withdrawn if the power is cut off.
Either in the ON or OFF state, when the machine dumps, the system will immediately turn off all
the heating components and display "E3"; then, pressing any button will not work.
Turn Off Buttons' Decorative Lights and Buzzers
In the ON state, press the "timing button" and "gear button" for 2 seconds at the same time to turn off
the output of the buttons' decorative lights and buzzers. Repeat the operation to turn on this function.
Child Lock
Either in the ON or OFF state, the child lock will be opened when you press and hold "+" and "-"
buttons simultaneously for 2 seconds for the first time. Repeat the operation to turn off this function.
Remote controller
Remote control usage: The key function is consistent with those on the operation panel. Note:
Press the "< >" button of the remote control to enter the highly warm air mode with one button.
ECO mode
In ECO mode, press "+, -" to set the required temperature. When the ambient temperature is lower
than the set temperature (lower than 4°F or above), the product will be heated in a highly warm air
state; when the ambient temperature is close to the set temperature (lower than 4°F), the product
will be heated in a lower warm air state; when the ambient temperature is higher than the set
temperature, the product will stop heating.
5
Summary of Contents for HC-1010
Page 1: ...HC 1010...
Page 8: ...SERVICE SUPPORT 7...
