pellenc FIXION 2, Operating Instructions Manual

Page: 6 / 48

TYING MACHINE FIXION 2
29_133084-G
2. SAFETY
2.1. INTENDED USAGE
• The Tying machine FIXION 2 is a professional tool whose use is reserved exclusively for tying vine shoots.
• Any other use of this tool is not intended.
• The PELLENC company accepts no responsibility for any damage caused by improper or unspecified use different
from its original intention.
• The user is responsible for any accident resulting from improper use or unauthorized modification of this tool.
• The PELLENC company accepts no responsibility for any damage caused by the use of non-original parts or
accessories.
2.2. GENERAL POWER TOOL SAFETY WARNINGS
Warning
Read all safety warnings, instructions, illustrations and specifications provided with this
power tool. Failure to follow all instructions listed below may result in electric shock, fire and/
or serious injury.
Note
Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your mains-operated (corded) power tool or battery-operated (cord-
less) power tool.
2.2.1. WORK AREA SAFETY
1. Keep the work area clean and well lit. Cluttered or dark areas invite accidents.
2. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids,
gases or dust. Power tools create sparks, which may ignite the dust or fumes.
3. Keep children and bystanders away while operating a power tool. Distractions can cause you to lose
control of the tool.
2.2.2. ELECTRICAL SAFETY
1.
Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs
with earthed (grounded) power tools.
Unmodified plugs and matching outlets will reduce risk of electric shock.
2.
Avoid body contact with earthed surfaces or grounded surfaces such as pipes, radiators, ranges, and
refrigerators.
There is an increased risk of electric shock if your body is earthed or grounded.
3.
Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
electric shock.
4.
Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep
cord away from heat, oil, sharp edges or moving parts.
Damaged or entangled cords increase the risk of
electric shock.
5.
When operating a power tool outdoors, use an extension cord suitable for outdoor use.
Use of a cord
suitable for outdoor use reduces the risk of electric shock.
6.
If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) pro-
tected supply.
Use of an RCD reduces the risk of electric shock.
6