BRUSH CUTTER EXCELION 2 LH
53_154421-A
4. On each of the blade supports, using a TORX 27
screwdriver, remove the 3 nuts to separate the blade
from its support.
5. Change the blades.
Fitting
1. Fit the blades on the corresponding blade support.
It is essential that the correct blades coincide with
the correct blade holders. To do this, refer to the ta-
ble below and match the references.
Support type
Blade
UP base (ref. 117491)
UP blade (ref. 117495)
DOWN base (ref. 117502)
DOWN blade (ref. 117497)
2. Using a Torx 27 screwdriver, fit the 3 screws and 3 nuts to lock the position of the blade on its support.
The screws must stop in their housing. Screw heads should be flush with the surface of the blade.
3. First install the blade support with the largest central
hole on the rotation axis of the head. This is the UP
base.
4. Fit the second blade support on the blade rotation
axis. This is the DOWN base.
The two smooth surfaces must be pressed against
each other.
5. Install the spring.
6. Position the bowl while firmly holding it in place.
65
Summary of Contents for EXCELION 2 LH
Page 2: ......
Page 82: ......
Page 83: ......
Page 84: ...PELLENC Quartier Notre Dame 84120 Pertuis France...