CONVERTOR CONVERTOR 12V/43V
77726
5. USING THE TOOL
5.1. START UP IN “PULSE” MODE (OLIVIUM ONLY)
"Pulse" mode:
The tool operates only when the trigger is
pressed. It stops operating when the trigger is released.
1. Put the tool in start-up position (please refer to the
instructions of the tool concerned).
2. Connect the black alligator clip (mark D) to the neg-
ative (-) terminal of the battery.
3. Connect the red alligator clip (mark E) to the positive
(+) terminal of the battery.
The tool is now powered up and ready to operate in ON/
OFF mode.
48_20_005
5.2. START-UP IN “CONTINUOUS” MODE
5.2.1. OLIVIUM
"Continuous" mode:
the tool starts with a single press
of the trigger and does not stop unless the trigger is
pressed again.
1. Connect the black alligator clip (mark D) to the neg-
ative (-) terminal of the battery.
2. Put the tool in start-up position (please refer to the
instructions of the tool concerned).
3. Press the trigger of the tool (mark F) and with the
other hand connect the red alligator clip (mark E) to
the positive (+) terminal of the battery while keeping
the trigger pressed.
The tool is now powered up and ready to operate in “Con-
tinuous” mode.
48_20_004
9