Table of Contents
2
PRE-INSTALLATION CONSIDERATIONS
Before installing any zoning system forethought and planning should take place to identify which type of HVAC
equipment the Z8 will be controlling, how many stages the equipment has, how many zones are going to be
conditioned, and what the square footage of each zone is for the size of the HVAC equipment. Because the Z8
uses wireless communication, plan installation locations appropriately for each Pelican device. Contact Pelican
Support at 888.512.0490 for further assistance.
GENERAL
The Pelican zone control solution uses strategic logic and built-in learning algorithms to properly condition
spaces or areas of diverse load. The zone controller uses sensors and software to monitor temperatures and duct
pressure to intelligently navigate complex building environments. The zone controller is a pressure dependent
device that maintains space temperature by modulating the amount of supply airflow brought into different spaces.
To aid in decision making, space or zone temperatures and total building load is continuously monitored and
wirelessly communicated to the zone controller from Pelican thermostats installed through-out the building. During
times when zones are being conditioned, rate of temperature change relative to set point is monitored and logic is
dynamically adjusted. This data allows the zone controller to satisfy the temperature and ventilation requirements
for each zone in a timely and energy efficient manner.
Specifications
Provided Equipment
Terminal Designations
Installation
Installation Process
Mounting
Wireless Module
Conventional Wiring Diagrams
Conventional System
Conventional System with Bypass
Conventional System with Bypass and Economizer
Conventional System with Variable Speed Fan (VFD)
Conventional System with Variable Speed Fan (VFD) and Economizer
Conventional System with Economizer
Heat Pump Wiring Diagrams
Heat Pump
Heat Pump with Bypass
Heat Pump with Bypass and Economizer
Heat Pump with Variable Speed Fan (VFD)
Heat Pump with Variable Speed Fan (VFD) and Economizer
Heat Pump with Economizer
Boiler Wiring Diagram
Setup and Configuration
Troubleshooting
3
3
4
6
10
12
13
15
16
17
18
19
20
21
22
23
24
25
26
27
28
31
