©
2019
Enviro Water Solutions, Inc.
3060 Performance Circle, Suite 2, DeLand, FL 32724
Figure 4
8.
Use the Hose Bib Assembly to connect your garden hose to the inlet side of the tank head.
9.
Slowly f
ill the tank with water until the water starts to flow out
of
the
outlet side
. Turn water off and let
soak
for
a
minimum of
48 hours.
10.
After
a minimum of
48 hours, turn the garden hose on 1/4 turn and rinse the tank for
30 minutes
thru the
inlet
side
to expel the
carbon fines
from the new media.
11.
Turn off the water.
12.
Disconnect Hose Bib Assembly from the inlet side and reconnect to the outlet side of the tank head.
13. Slowly fully open the garden hose and r
un water through the
outlet
side for
3
minute
s
to reset the carbon bed.
14.
Turn off the water.
15.
Remove the Hose Bib Assembly from the tank head and disconnect the garden hose.
Water
Whole House Water Filter
Garden
Hose
Hose Bib
Assembly
Figure
5
Bypass Valve
Bypass Valve
Head
Head
Tank
Tank
Quick-Connect
16.
Install the
tank
head back onto the Bypass Valve hand-tight all the way to the tabs. Turn the arrows on the
Bypass Valve back to their original positions.
Note
: Avoid high flow rates for the first 72 hours to avoid flow restriction caused by carbon blockage of the upper
basket inside the carbon tank.
Examples of high flow rate
items
are bathtubs, multi head showers, washing machines, dishwashers, hose spigots,
multiple faucets or other water applications at one time. If you need to use these items in the first 72 hours simply
put the carbon tank into bypass until you are finished with that application. High flow rates are 3 gallons per
minute and above.
Examples of low flow rate
items
are
a
toilet, faucet
or
shower.
INLET
OUTLET
INLET
OUTLET
INLET
OUTLET
PC600-R / PC1000-R, Rev E —
Pelican PC600/PC1000 Replacement Media
P
elican
W
ater.com
(877) 842-1635
