EN 9
OPERATING
Use
Pans
• Always ensure that the flames remain under the pan. A lot of energy
is lost when flames burn around the outside of the pan.
The handles will also become too hot.
• Do not use pans with a base diameter smaller than 12 cm.
Smaller pans are not stable.
Burner
Diameter of the pan
Rapid burner
220-300 mm
Standard burner
180-220 mm
Simmer burner
120-180 mm
Pan support
Place the pan supports vertically, without sliding them over the drip
tray. Use the positioning notches to position the pan supports on the
drip tray.
Burners
Put the burner parts together using the positioning notches.
1. Burner head
2. Burner base
3. Thermocouple
4. Sparkplug
Decorative glass cover
Before opening the decorative cover, make sure that it is clean and that
there is no water on the cover.
The decorative cooker cover is made of glass. Do not close it until
the cooking area has cooled down fully.
wrong
right
