EN 32
This appliance can be connected in accordance with a
• 3 phases connection (3 N~ 380 V - 415 V / 50 Hz - 3 x 16 A).
• 2 phases connection (2 N~ 230 V - 240 V / 50 Hz - 2 x 16 A)*.
*2 phase connection
If your home installation is not fitted with a 3 phase power supply (3 x 16 A), the appliance’s total
power consumption can be limited (power limiter) so that the power consumption doesn’t rise
above 2x16 Amp. When the power limiter is activated, not all induction zones can be used at
full power. The appliance will beep and the display will flash the set power when the maximum
power consumption has been reached.
Setting the power limiter
1. Within 2 minutes of connecting the appliance to the electric power press all 4 cooking zone
selection buttons simultaneously. Keep these pressed down for at least 3 seconds.
‘Hi’ will appear in the display.
2. Push the ‘-’ or ‘+’ button and select ‘Lo’ in the display.
3. Again press all 4 cooking zone selection buttons and keep these pressed for at least
3 seconds.
Installation
• When placing the cooker next to a tall cupboard or another wall made of flammable
material, keep at least 50 mm distance between the cooker and the walls.
• Also, keep a minimum distance of 650 mm between the hob and any cooker hood placed
above the cooker.
• If you place the cooker in a kitchen unit, the minimum space must be adhered to.
• If the cooker is built in between kitchen cabinets, the lining of the units must be able
to withstand temperatures up to 90 °C.
Levelling
• The height of the cooker can be adjusted with the adjusting feet.
• If you want to install the cooker on a platform, make sure that it is securely fastened.
INSTALLATION
Summary of Contents for PFI8160WIT
Page 1: ...Gebruiksaanwijzing Fornuis Instructions for use Cooker PFI8160WIT PFI8265WIT PFI8265RVS...
Page 34: ......
Page 66: ...EN 34...
Page 67: ...EN 35...
