Pelgrim ISW1000RVS, Instructions For Use Manual

Page: 52 / 60

EN 10
INSTALLATION
General
This appliance must be connected to the electric mains by an authorised
installer who is familiar with the safety precautions and will carry them
out. The appliance is in compliance with European guidelines.
Important information:
• The distance between the lowest point of the cooker hood and
a gas hob must be at least 65 cm. If using an electric, ceramic
or induction hob, this distance must be at least 55 cm.
• If the cooker hood is connected to an existing exhaust duct, no
other appliance must be connected to the duct (such as a hot water
heater or a stove).
• Consider local regulations with respect to the ventilation of gas
appliances.
• The shorter the duct, and the fewer bends in it, the better the
cooker hood will work.
• Check before you start drilling that no installation pipe(s) is/are
present.
• The connection pipe to the cooker hood has a diameter of 125
or 150 mm. We recommend that the exhaust pipe has as large a
diameter as possible.
• The enclosed installation materials are suitable for reinforced
concrete and brick walls. For some types of wall you may need
special plugs and screws.