Pelgrim GVW240LS, User Manual

Page: 44 / 104

Problem and alarm code Possible cause and solution
The appliance does not drain the wa‐
ter.
• The indicator
flashes 2 times in‐
termittently.
• Acoustic signal sounds 2 times in‐
termittently.
• Make sure that the sink spigot is not clogged.
• Make sure that the interior filter system is not
clogged.
• Make sure that the drain hose has no kinks or
bends.
The anti-flood device is on.
• The indicator
flashes 3 times in‐
termittently.
• Acoustic signal sounds 3 times in‐
termittently.
• Close the water tap.
• Make sure that the appliance is correctly instal‐
led.
• Make sure the baskets are loaded as instructed
in the user manual.
Malfunction of the water level detection
sensor.
• The indicator
flashes 4 times in‐
termittently.
• Acoustic signal sounds 4 times in‐
termittently.
• Make sure that the filters are clean.
• Switch the appliance off and on.
Malfunction of the wash pump or the
drain pump.
• The indicator
flashes 5 times in‐
termittently.
• Acoustic signal sounds 5 times in‐
termittently.
• Switch the appliance off and on.
The temperature of the water inside
the appliance is too high or malfunction
of the temperature sensor occurred.
• The indicator
flashes 6 times in‐
termittently.
• Acoustic signal sounds 6 times in‐
termittently.
• Make sure that the temperature of the inlet wa‐
ter does not exceed 60°C.
• Switch the appliance off and on.
Technical malfunction of the appliance.
• The indicator
flashes 12 times
intermittently.
• Acoustic signal sounds 12 times in‐
termittently.
• Switch the appliance off and on.
The level of water inside the appliance
is too high.
• The indicator
flashes 15 times
intermittently.
• Acoustic signal sounds 15 times in‐
termittently.
• Switch the appliance off and on.
• Make sure that the filters are clean.
• Make sure that the outlet hose is installed at the
right height above the floor. Refer to the installa‐
tion instructions.
44