84
installation instructions
General
The fitting of the appliance should only be carried out by a registered Corgi
gas fitter.
Please note:
The type of gas and the country for which the appliance has been designed are
indicated on the ratings plate.
This is a category 3 appliance.
Gas connection
Please note:
The gas connection must comply with national and local regulations.
•
We recommend that the hob be connected by means of a fi xed pipe.
•
Connection using a specially designed safety hose is also permitted.
Behind an oven use must be made of a pipe made entirely out of metal.
•
A safety hose may not be bent and must not come into contact with moving
•
parts of kitchen units.
In all cases the connection tap for the appliance must be positioned such that
•
it is easily accessible.
Before using the appliance for the fi rst time check the connections using water
•
and washing-up liquid to ensure that there are no gas leaks.
The hose should not be allowed to come in contact with parts with a
•
temperature above 65 ˚C.
The hose may not be twisted or pulled and may not be narrowed or have
•
narrow curves.
The hose should not come in contact with sharp objects.
•
The hose must be accessible over the entire length to check upon its state.
•
Replace the hose before the indicated date on the hose.
•
The bottom of the hob becomes hot.
•
