75
Igniting and adjusting
A symbol near the control knob indicates which burner is being controlled.
Lighting burners with spark ignition
Push and turn the control knob counter
clockwise until it reaches the full setting.
The burner ignites.
The control knob must be held down for
about 5 seconds due to the flame failure
device.
When the burner does not ignite, check whether:
- the burner cap is placed on top of the burner correctly;
- the burner/spark plug is clean and dry.
Each burner can be adjusted continuously between the full and low positions.
controls
burner position
0-setting/closed position
low setting
full setting
