[ 18 ]
Pelco Manual C2914M-F (08/05)
SPECIFICATIONS
GENERAL
Imaging Device:
1/3-inch interline transfer CCD
Picture Elements
CC3710H and CC3610H:
NTSC 768 (H) x 494 (V); PAL 752 (H) x 582 (V)
CC3710S:
NTSC 510 (H) x 492 (V); PAL 500 (H) x 582 (V)
Sensing Area:
6 mm diagonal
Scanning System
NTSC:
525 lines, 2:1 interlace
PAL:
625 lines, 2:1 interlace
Synchronization System:
AC line lock/internal
Horizontal Resolution
CC3610H models:
480 TV lines
CC3710S models:
330 TV lines
CC3710H models:
480 TV lines
Iris Control:
Selectable on/off
Electronic Shutter Range
NTSC:
1/60-1/100,000 second
PAL:
1/50-1/100,000 second
Auto Iris Lens Type:
DC/video drive (automatic sensing)
Minimum Illumination
CC3610H models:
0.4 lux at F1.2, 40 IRE, AGC on
CC3710S models:
0.6 lux at F1.2, 40 IRE, AGC on
CC3710H models:
0.7 lux at F1.2, 40 IRE, AGC on
Signal-to-Noise Ratio:
>50 dB
Vertical Phase:
Adjustable ±180°
Automatic Gain Control:
On/off switchable
Electronic Shutter Control:
On/off switchable
Backlight Compensation:
On/off switchable
Flickerless Mode:
On/off switchable
Internal Sync:
On/off switchable
Auto White Balance:
On/off switchable
Signal Processing:
Digital Signal Processing (DSP)
Video Output:
1 Vp-p, 75 ohms
Auto White Balance Range:
2,500°K to 9,500°K
Gamma Correction:
0.45
ELECTRICAL
Power Requirements
Low Voltage Models:
24-28 VAC ± 10% or 12-36 VDC ± 10%
High Voltage Models:
110-240 VAC ± 10%
Power Consumption:
5 watts
Power Connector
Low Voltage Models:
2-pin terminal strip, RJ45-10 connector
High Voltage Models:
Integral power cable
Video Connector:
Composite via BNC, composite and twisted-pair via RJ45-10
Service Connector:
2.5 mm jack for optional ICS090-SC service/monitor cable
(compatible with any standard monitor BNC connector)
Lens Jack:
4-pin connector (miniature square)
Summary of Contents for CC3610 series
Page 20: ...20 Pelco Manual C2914M F 08 05...
Page 21: ...Pelco Manual C2914M F 08 05 21...
