19
Pelactiv Ultrasonic System
1. Face probe output 2. Eyes probe output 3. Body probe output
4. Main power switch 5. Power input plug 6. Protective tube plug
Connection instruction:
1. Connect the power cable with host machine;
Plug-in separately fl exible cables of ultrasonic
wave probe with corresponding output at
back of host machine.
2. Press the key “
” on control panel,
indicator lights, host machine
is stand-by.
>Time display “15”;
>Energy display “5”;
>Face probe working indicator
lights
>Continuously working status indicator
lights
>On the right side of start/pause “ ” indicator lights
In this situation, press START/PAUSE key to turn on output of host machine.
3. Ultrasonic Wave Function Adjustment
Time setting:
Press key “
“ and “
” for TIMER” to set up the working time of host machine,
time range 1~30 min.
Energy adjustment:
Press “
“ and “
” for “ENERGY” to control the energy output of host machine
adjustment levels 1~9.
Output probe selection:
Press “
” key for ultrasonic wave control to select the output probe. >The
indicator
lights meaning to the face probe is selected currently; indicator
lights meaning to the body probe is selected currently; indicator
lights
meaning to the eye probe is selected currently;
Waveform output selection: