PELA PO100, Manual, Page: 3 / 8

The surface conditioning tool from PELA Tools is a powerful and professional tool that is made for many years
of reliability For surface treatment or eventual colour- or rust removal. There is a socket for different drums
and a rigidly mounted D-handle for maximum safety. A high torque and ball bearing supported engine present
a smooth operation and a long life span. The speed is easily controlled by a rotating handle with 6 steps and
ON/OFF steering.
Technical specifications
Type: PO100
Voltage rating: 230V
Rated frequency: 50Hz
Rated power: 1100W
Nominal speed: 1000-3700 rpm
Polishing drum: ø 100mm x 100mm
Weight: 4,3 kg
Insulation: Protection degree II
Sound pressure: LpA: 92dB (A), KpA: 3dB
Sound power level: LwA: 103dB(A), KwA: 3dB
Vibration in handle: ah, P = 8,15m/s², K = 1,5m/s²
(ah, P with description of the working method grinding)
Important safety instructions
The following instructions appear in this manual, on the label and on all other information that comes with the
product.
DANGER indicates a dangerous situation which, if not avoided, will result in death or serious injury.
WARNING indicates a dangerous situation which, if not avoided, could result in death or serious injury.
NOTE is used to address usage that is not related to personal injury
General Safety Measures:
Read all instructions. Failure to follow all instructions given below may result in electric shock, fire, and/or seri -
ous injury. The term “power tool” listed in all the warnings below refers to your surface conditioning tool.
SAVE THESE INSTRUCTIONS!
1. Safety For Working Area
a) Keep the working area clean and well lit. Messy or dark surfaces creates risks of accidents.
b) Do not use power tools in potentially explosive areas, for example near flammable liquids, gases
or dust. Power tools create sparks that can ignite dust or smoke.
c) Keep children away when using the power tool. Distraction can result in you losing control.