13
Owner’s manual
EN
Safe driving
Keep in mind that responsibility for safety while operating
a vehicle is solely on the driver of the vehicle. The camera is
intended as a supplement tool and CANNOT be considered as
a device dismissing the driver from cautious vehicle operation
nor be used as a substitute for rear view mirror in the vehicle.
It is intended to assist in safe driving and to provide a broader
rear view while the vehicle is in reverse. The device monitors area
behind the vehicle and allows for keeping safe distance from
obstacles, but does NOT allow for not exercising special caution
while driving! The producer of this device does not claim liability
for any misuse of the product nor damages or accidents resulting
from failure to observe these precautions or safety instructions.
instructions and safety measures
1. The driver should bring the vehicle to a stop once the constant
sound signal is being heard. The parking sensors do not support
braking system and will NOT automatically stop the vehicle
once a certain distance from obstacle has been reached.
2. Pay special care when reversing – slow down to minimum
to avoid hitting the obstacle.
3. Clean the sensors regularly. Remove ice, snow, dirt, dust,
mud etc. to ensure proper operation. Any dirt on the sensor
decrease its sensitivity by about 20%. In case of a sensor
being covered in ice, the system will not work properly!
4. Avoid flattening, cutting, damaging the insulation,
extending the cables connecting the sensors to the
control unit – it may negatively affect their operation.
5. The system operates in an optimum way when the vehicle
moves with speed of around 5 km/h.
