Pegasus W1500 series, Instruction Manual

Page: 6 / 40

Be sure to ground the machine and labor saving device securely.
If you use the machine and/or labor saving device incorrectly, you may get an electrical shock.
If you use the machine and/or labor saving device incorrectly, your hands and/or fingers may
be injured.
Be sure to follow the instructions when you operate the machine and/or labor saving device.
Unplug the machine or shut off the power when checking, adjusting and/or repairing the
machine and/or labor saving device, or when lightning may strike.
Denotes the normal rotating direction of the machine pully.
Never do this.
Indicates a danger of burn injury due to high temperature.
3.Safety precautions
①
Applications, purpose
Our industrial sewing machines have been developed in order to
increase quality and/or production in the sewing industry.
Accordingly never use our products for other than intended use
described above.
②
Circumstances
The environment in which our industrial sewing machines are used
may seriously affect their lives, functions, performance and/or
safety.
For safety, do not use the machine under the
circumstances below.
1.Do not use the machine near objects which make noise such as a
high-frequency welder, etc.
2.Do not use or store the machine in the air which has vapor from
chemicals, or do not expose the device to chemicals.
3.Do not leave the machine outside, in high temperatures or the
direct sun.
4.Do not use the machine in the places of high ambient
temperature and humidity that seriously affects sewing machines.
Symbols and messages
Symbols and messages
5.Do not use the machine on the condition that the voltage fluctua-
tion range is more than ± 10% of the rated voltage.
6.Do not use the machine in the place where the supply voltage
specified for the control motor cannot be properly obtained.
③
Safety measures
(1)Safety precautions when you perform maintenance on
the machine.
● Always turn off the power, unplug the machine and then make
sure that the machine does not run by pressing the treadle
before performing any maintenance, such as checking, repairing,
cleaning, etc. However, if you need to perform these procedures
with the power on, to prevent accidents due to the unexpected
start of the machine and users' misoperation, estabish your oun
procedures for safety and follow them.
● Always turn off the power and unplug the machine
before performing the procedures shown below.
・
Lubrication
・
Threading
・ Cleaning
・
Replacing the needle
・ Checking/replacing the oil element
・ Replacing the oil
Be sure to study very carefully
for
for
safety.
safety.
3