8
Care and Cleaning
□
□
□
Do not use abrasive cleaners when cleaning this faucet.
1
Flushing and checking for leaks
□
Turn on the water supply and allow both hot
and cold water to run for at least one minute
each. This flushes away any debris that could
cause damage to internal parts.
□
Run water into a large pan or bucket. While
the water is running, check for leaks.
□
Turn off the water, replace the aerator
and clean faucet with warm water and
a soft cotton towel.
Operation
IMPORTANT:
After installation is complete, remove the
aerator to flush the water lines.