3
-
Do not let persons, especially children, not involved in the work touch the tool or the extension
cord and keep them away from the work area.
5 - Store idle tools
-
When not in use, tools should be stored in a dry locked-up place, out of reach of children.
6 - Do not force the tool
-
It will do the job better and safer at the rate for which it was intended.
7 - Use the right tool
-
Do not force small tools to do the job of a heavy duty tool.
-
Do not use tools for purposes not intended; for example do not use band saws to cut Food or
combustibles.
8 - Dress properly
-
Do not wear loose clothing or jewellery, they can be caught in moving parts.
-
Non-skid footwear is recommended when working outdoors.
-
Wear protective hair covering to contain long hair.
9 - Use protective equipment
-
Use safety glasses.
-
Use face or dust mask.
- Use ear protect.
- Use safety gloves.
10 - Connect dust extraction equipment
-
tool is provided for the connection of dust extraction and collecting equipment,
ensure these are connected and properly used.
11 - Do not abuse the cord
-
Never yank the cord to disconnect it from the socket. Keep the cord away from heat, oil and
sharp edges.
12 - Secure work
-
Where possible use clamps or a vice to hold the work. It is safer than using your hand.
13 - Do not overreach
-
Keep proper footing and balance at all times.
14 - Maintain tools with care
-
Keep cutting tools sharp and clean for better and safer performance.
-
Follow instruction for lubricating and changing accessories.
-
Inspect tool cords periodically and if damaged have them repaired by an authorized service
facility.
-
Inspect extension cords periodically and replace if damaged.
-
Keep handles dry, clean and free from oil and grease.
15 - Disconnect tools
-
When not in use, before servicing
and when changing accessories such as blade, disconnect
tools from the power supply.
16 - Remove adjusting keys and wrenches
-
Form the habit of checking to see that keys and adjusting wrenches are removed from the tool
before turning it on.
17 - Avoid unintentional starting
-
Ensure switch is in "off" position when plugging in.
18 - Use outdoor extension leads
-
When the tool is used outdoors, use only extension cords intended for outdoor use and so
marked.
19 - Stay alert
-
Watch what you are doing, use common sense and do not operate the tool when you are tired.
20 - Check damaged parts
Summary of Contents for SRP14-CE
Page 14: ......
