Peer
Station
SIG-220
– Installation Guide
(Preliminary)
19
Setting the Video Mode
Use the RIGHT arrow key to
select ‘TV Standard’ and then use
the UP/Down arrows to select the
required parameter. The following
settings are available:
TV Standard
: NTSC (US) or PAL
(Mostly Europe). Most current
TVs can play both types
Aspect Ratio
: 16:9 (wide-screen)
or 4:3 letterbox (older, standard
TVs). Choose Auto if not sure
Video Port
: Choose Composite /
S-Video for Standard Definition
TVs. For true HD performance,
you need to connect either
Component or DVI-to-HDMI
cable, and select Component /
DVI
Video Mode
: Choose 480i/576i
for standard TVs, 1080i for
HDTVs
Note:
You must use both connections (analog &
digital) to switch between them.
After choosing the new display mode the
screen will go blank, switch your TV set to
the new chosen input and verify the new
display type.
Note:
You must use both connections (analog &
digital) to switch between them.
After choosing the new display mode the
screen will go blank, switch your TV set to
the new chosen input and verify the new
display type.
5e
5e
